These meters feature easy, push-button operation, a convenient HOLD function, and Auto-off function that shuts meter off after 20 minutes of nonuse. Meters offer two modes of five-point calibration. For quick and easy calibrations, use automatic mode with preset calibration points at the most popular values. For more flexibility, calibrate in the manual mode and set your calibration point at any value. Set-up functions let you customize automatic temperature compensation, cell constant, and TDS conversion factor for better accuracy and faster use. The protective rubber boot helps shield your meter from drops and dings, and features a built-in stand. Con 6 and TDS 6 feature automatic or manual ranging across five ranges for a wide variety of applications ranging from pure water to boiler blow down water. SALT 6 features custom Conductivity-to-TDS conversion curve for the highest accuracy. What's included: protective rubber boot, easy-to-clean fast response conductivity probe (cell constant K=1.0), and four AAA batteries.
Specifications
Conductivity range
0 to 20.0 µS, 0 to 200.0 µS, 0 to 2000 µS, 0 to 20.00 mS, 0 to 200.0 mS
Conductivity resolution
0.01 µS, 0.1 µS, 1 µS, 0.01 mS, 0.1 mS
Conductivity accuracy
±1% full scale
Temp range
-10.0 to 110.0°C
Temp resolution
0.1°C
Temp accuracy
±0.5°C
Temp compensation
automatic or manual from 0.0 to 50.0°C
Temp coefficient
adjustable from 0 to 3% per °C
Cell constant
Selectable, 0.1,1, and 10
Battery
Four 1.5 V AAA batteries (included)
Battery life
approx. 100 hours continuous use
Dimensions
Meter: 5.5" x 2.7" x 1.3" (14 x 7 x 3.5 cm) Probe: 5.1"L x 0.625"dia with 36" cable (13 cm L x 1.6 cm dia with 91 cm cable)
Calibration
5 maximum, one per conductivity range
Operating conditions
32 to 122°F (0 to 50°C)
About Us
Electrical
Environmental
Material Testing
Water Quality
Resources
Bosworth Instrument 1995 E. 55th St. Cleveland, OH 44103 | 800-804-6218 | info@bosworthsupply.com
