State of the art ultrasonic technology allows you to obtain ultra precise thickness measurements and store them to memory. This digital tester is capable of reading wall thickness down to 0.010” with a super high adjustable resolution of up to 0.0001”. This dynamic sonic gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2650 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.
Specs:
Display type
4-digit LCD w/ Backlight
Display Resolution
Inch: 0.01”, 0.001” or 0.0001” (selectable)
Metric: 0.1mm, 0.01mm or 0.001mm(selectable)
Measuring Range
Standard Mode: 0.010” – 0.787” (steel)
Accuracy
+/-0.0002” (0.005mm) if thickness < 3mm
+/-0.002” (0.05mm) if thickness < 20mm
Sound velocity range
3280-32805 ft/s (1000-9999m/s) Adjustable
Upper/Lower Limit Preset Alarm
Yes
Operating temperature
32-122 degrees F
Refresh Frequency
4MHz up to 25MHz
Memory
500 Test Values
Output
N/A
Power supply
AA alkaline batteries (2pc)
Battery Life
Approx. 200 hours (w/backlight off)
Power consumption
Working current is less than 3V
Dimensions
5.86” x 2.87” x 1.25” (149 x 73 x 32mm)
Weight
5.6oz
(160g)
About Us
Electrical
Environmental
Material Testing
Water Quality
Resources
Bosworth Instrument 1995 E. 55th St. Cleveland, OH 44103 | 800-804-6218 | info@bosworthsupply.com
